| |
| |
| 3-PORT SIGNAL ISOLATOR--------------- ------------------------------------------------------------------------------BP3SI |
| |
| |
|
- Input : DC volts, 0/4~20 mA, Ohms, RTD
Thermocouples, AC Amps, AC volts, load cell etc.
- Output : DC volts, 0/4~20 mA
- Supply : 12~36 V DC, 85 ~ 265 V AC / 50/60 hz
- Input / Output / Supply isolation : 1000 V AC / 1 min,
250 V AV continuous
- DINRAIL enclosure
|
| |
GENERAL
BP3SI is a 3 port signal isolator that accepts any one of the common process inputs and generates an isolated current or voltage output. It has exceptionally high accuracy and stability |
|
| |
| SPECIFICATION All specifications at ambient of 25° C, unless specified otherwise |
| |
| INPUTS |
|
| Input types |
Specify any one listed below |
| Thermocouple |
B, E, J, K, R, S, T, N, etc. |
| RTD |
Pt100, Pt200, Pt1000, 3-wire |
| DC Voltage |
75 mV / 200 mV / 1 V/ 10V/
100V/ 300V/ 800V etc.(FS) |
| DC Current |
0~20 mA, 4~20mA |
| Resistance |
500Ω, 1 KΩ , 2 KΩ , 5 KΩ ,
10KΩ(FS) |
| Special |
0~1 A AC, 0~5 A AC, 0~250
V AC load cell, etc. |
| Excitation supply for |
10 V DC ± 5%, 30 mA
nominal, |
| load cell |
for 350Ω bridge |
| Bridge Connection |
4-wire or 6-wire(with
Provision for remote
sensing) |
| Transmitter supply |
18 V DC for 2- wire
transmitter (provided if input
type is DC current- 4~20 mA) |
| Input range |
User specified |
| ADJUSTMENTS |
|
| Zero, span |
Multiturn potentiometers
through detachable panel |
| OUTPUTS |
|
| Output types |
Current - 0~20mA, 4~20 mA
(Load 600 Ω max)
Voltage -
0~1 V DC, 0~10 V DC
(Load 1 mA max) |
| Input / Output relation |
RTD - Temperature linear
Other inputs - Voltage
linear(output is proportional
to input signal - no
linearisation of input is
done) |
|
| Current limit |
Current output - 25 mA
Voltage output - 10 mA |
| ACCURACY |
|
| Input / Output transfer |
± 0.1% of span (includes
repeatability, |
| acccuracy |
hysterisis & non linearity) |
| Temperature effect on |
See Table 1 |
| accuracy |
|
| Accuracy for different |
See Table 1 |
| inputs |
|
| ISOLATION |
|
| Mutual isolation between |
1KV AC RMS / 1 minute, |
| input / output / supply |
250 V AC RMS continuous |
| POWER SUPPLY |
|
| Supply voltage |
12~36 V DC
85~265 V AC / DC, 50/60 hz
|
| ENCLOSURE |
|
| Material |
ABS plastic |
| Dimensions (in mm) |
75(H) x 55(W) x 110(D) |
| Mounting |
Snap on for 35mm DIN rail
to DIN 46277 |
| Connection, single/ |
≤2.5mm2, AWG 14 |
| stranded wires |
|
| TEMPERATURE, HUMIDITY |
|
| Ambient, Operation |
0 to60 °C |
| Relative humidity |
0 ~95% |
| |
|
| |
|
|
|
| |
Table 1 |
| Input |
Range |
Accuracy
(% of span) |
Temperature
effect on
accuracy
(%of span/°C) |
| DC Current |
0~20 mA, 4~20mA |
± 0.1 |
± 0.01 |
| DC Current |
0~1A DC, 0~5A DC |
± 0.25 |
± 0.01 |
| DC Voltage |
Upto 10 V DC |
± 0.1 |
± 0.01 |
| DC Voltage |
>10V DC |
± 0.25 |
± 0.01 |
| AC Current |
0~1 A AC, 0~5 A AC |
± 0.5 |
± 0.01 |
| AC Voltage |
Any (<500 V AC) |
± 0.5 |
± 0.01 |
| RTD, Pt100, Pt 50, etc. |
Any |
± 0.1 |
± 0.01 |
| Thermocouple |
Any |
± 0.1 of span ± thermocouple non-linearity error |
± 0.01 |
| Load Cell |
5mV~50mV (Excitation supply : 10V DC) |
± 0.1 |
± 0.02 for 12~36 V DC supply ± 0.04 for 85~265 V AC/DCsupply |
|
|
|
| |
| CONNECTION DIAGRAMS |
| |
| BP3SI can be supplied with any combination of input/output/supply. Examples & options are given below |
| |
|
|
|
