Process Control -2-WIRE PROGRAMMABLE, ISOLATED TEMPERATURE TRANSMITTER-TRX30

Products >>> Process Control Instruments

2-WIRE PROGRAMMABLE, ISOLATED TEMPERATURE TRANSMITTER----------------------------------------------TRX30

Universal input, 4 Digit LED display

True 2-wire operation Universal input: TC : B, E, J, K, N, R, S, T RTD : Pt50, Pt100, Pt200 4~20 mA, linear / square root, 0~50 mV 0.1% linearisation accuracy Software calibration - no trimpots Upscale / downscale selection 11.5~32 V DC loop supply 4~20 mA or 20~4 mA selection 4-digit LED display enhances utility DIN Rail and FLP versions	TRX30 is a microcontroller based user programmable high performance, "all-in-one' 2-wire temperature transmitter. Its high reliability industrial design offers some rare functions. TRX30 has an integral 4-digit LED display, which enhances utility greatly and also allows a large amount of programming.

Table1 Tambient = 25 °C

Sensor / Input	Range Limits		Range In Which		Typical Accuracy	Worst Case
	(°C / EU )		Accuracy Is Specified		At 30 °C	Accuracy
	Low Scale	High Scale	Low Scale	High Scale	(°C / EU )	(°C / EU )
Pt-6% Rh / Pt- 30% RH (B)	400	1820	400	1820	±5	±6
Chromel / Constantan (E)	-270	1000	0	1000	±2	±3
Iron / Constantan (J)	-210	760	0	760	±2	±3
Chromel / Alumel (K)	-270	1372	-50	1200	±2	±3
Nicrosil / Nisil (N)	-270	1300	-50	1200	±2	±3
Pt / Pt-13% Rh (R)	0	1760	0	1760	±4	±6
Pt / Pt-10% Rh (S)	0	1760	0	1760	±4	±6
Copper /Constantan(T)	-270	400	-200	400	±2	±4
Pt100, 3-wire	-220	850	-200	400	±0.2	±0.5
Linear voltage (0~50 mV)	-1999	9999	-1999	9999	±0.1%	±0.25%
Linear current (4~20 mA, 0~20 mA)	-1999	9999	-1999	9999	±0.1%	±0.25%
Non- linear current (squara rooted)- 4~20 mA	-1999	9999	-1999	9999	±0.2%	±0.5%

Note : Non-std inputs, such as 0~10 V DC, 0~100 V DC, etc. available on request

Specification--------All specifications at ambient of 25 °C, unless specified otherwise

INPUT
Input type
Thermocouple	B, E, J, K, N, R, S, T
RTD	Pt50, Pt100, Pt200 4~20mA, linear / square root 0~50 mV
Range	See Table 1
Display
Din Rail	4 digit, 0.3" (7.6mm), red LED
Flameproof	4 digit, 0.56" (14.2mm), red LED
Monitoring
Sensor break detection
Upscale current	20~22mA
Downscale currnet	3.9mA
Output
Current, selectable	4~20 mA, 20~4mA
permissible load	600 Ω @ 24 V DC, 20 mA
Current limit	20~22 mA
Accuracy
Linearity & calibration	See Table 1
Cold junction compensation	± 1 °C
Temperature effect	± 0.5% of span / 25 °C
on accuracy
Supply voltage effect	± 0.002% of span / V
Supply ripple effect,	± 0.005% of span
50/60 hz, 5 Vp - p
Power supply
Supply voltage	11.5 to 32 VDC loop supply
Isolation
Between input & loop	1000 V AC RMS / 1 minute
supply	250 V AC RMS, ontinuous
Calibration
Zero & span	Through front panel keys & display

Temperature, Humidity
Ambient, storage	-22~ + 85 °C
Ambient, operation	0~60 °C
Relative humidity	0~95%
Enclosure - DIN Rail
Material	ABS plastic
Dimensions	75(H) x 45(W) x 109.5(D) mm
Mounting	Snap on for 35 mm DIN rail to DIN 46277
Connection, single/stranded	2.5mm²,AWG 14
wires
Weight	<200 grams
Protection	IP 20
Enclosure - Flameproof
Material	Aluminium alloy
Dimensions	100(H) x 100(W) x 152(D) mm
Mounting	2" pipe
Certification	Flameproof for gas groups I, IIA & IIB by CMRI Dhanbad Enclosure certified for gas group IIC also available
Programming	Through externally accessible membrane keypad (I, IIA & IIB only)
Protection	IP 65
Programmable parameters
Unit	°C, °F, EU
Autoranging	On, Off
Low scale	-1999 to 9999
High scale	-1999 to 9999
Preset current	20 to 22 mA
(Sensor break)
Decimal point	0.001, 0.01, 0.1 or 1
Output type	4~20, 20~4mA
Digital filter	A, B, C, D, E, F

Connection Diagram